Our Restoration & Coating Process Is The Best In the Business!
All roofs have an expected life cycle. Our waterproof, seamless roof coating systems will increase that life cycle by restoring your existing roof and saving you money!
Typical Rubber and Asphalt Roof Restoration:
(depending on product and manufacturer)
- We apply a rinse and pressure wash the entire roof surface to remove all contaminants which allows for the better coating adhesion.
- The entire roof receives a prime or tack coat to better prepare the surface to receive the base coat.
- We repair all bad areas and reinforce all seams, vents, flashing, skylights, and penetrations with our high strength polyester mesh repair system.
- The entire roof receives a base coat as the first step of our three-part coating process.
- We then apply the first cool white coating which is applied over the gray base coating.
- Then we complete the process by applying the final cool white coating, this creates the final step in providing a seamless membrane over the entire roof surface.
Typical Metal Roof Restoration:
(depending on product and manufacturer)
- We check every fastener for tightness and tighten as needed.
- We seal every fastener to eliminate and leaks, this also keeps the fasteners from backing out again due to thermal shock.
- The entire metal roof gets pressure washed to remove all contaminants and better allow for coating adhesion.
- We remove any surface rust by hand or mechanical tooling.
- All rusted areas are primed.
- All bad areas are repaired or patched.
- The entire roof receives a gray base coating as the first step of our two-part coating process.
- We apply a second coating. This is the first and final cool white coating to be applied over the gray base coating. this creates the final step in providing a seamless membrane over the entire metal roof surface.
Depending on product and manufacturer the above process may change accordingly.